3D Printing Drawing Pen with Charge by Power Bank
||Price per piece
Ship my order(s) to:
Choose Shipping Method:
Add to Wish List
2016 new design slim 3D Pen can use power bank
1.Connect AC/DC adapter to AC power socket and 3D pen DC power socket (or use the USB cable to connect with the power bank which output is more than 2A), when the red LED turns on,the pen is in the stanby status.
2. Press the filament loading button,it starts to heat,and the green light will flash,after around 40 seconds ,the green light stop flashing,it means it is ready for loading filament
3.Insert the 1.75mm filament into the "filament loading hole",Keep pressing the "filament loading button",the material will be loaded . Hold till plastic material comes out from the nozzle ,it means the filament is ready.( Double press the button can load the filament automatically, press the button again to exit automatic mode)
4. Temperature adjustment :open the black cover ,and use the plastic screwdriver to turn the temperature switch(clockwise temperature up,anticlockwise temperature down,each level is 15°C),temperature range is 130°C-240°C
5.Speed adjustment :slip the speed controller to adjust the speed
6 Unload filament:do as the Item 2,then press unload filament button ,the filament will move out automatically.(Double press the button can unload the filament automatically, press the button again to exit automatic mode)
7. Replace nozzle set:open the black cover by the plastic screwdriver ,and remove the screw,then plug off the nozzle set
8. The pen will enter standby mode after 2 minutes no operation,and press the loading filament button to wake it up.
9.Do not touch the nozzle during working
1.Heating time may be affected by environmental temperature
2.The filament end should be cut correctly before loading
3.Suggest to unload the filament after finish drawing
||Blue, Purple, White, Yellow
||(L x W x H) 175 x 17 x 20mm
||U.S. Dollar 22
|Type of Payment:
||TT, PayPal, Western Union
|Minimum Order Quantity:
|Production Lead Time:
||7 workdays after payment day(s)
Ship my order(s) to:
||20.5cm x 12.2cm x 6.5cm
||0.5 kilograms(kg) / unit
If you are not entirely satisfied with your purchase, please return the unused item within 30 days and we are happy to issue a refund.
- Send your request of return for exchange by using the "Contact Supplier" function, together with (1) transaction date, (2) your name and contact info, (3) the copy of your transaction receipt or proof of transaction and (4) reason for return for our follow-up.
- ONLY unused products with original packaging and receipts are entitled to refund. Your request must be made within 30 days of the purchase.
- You are required to pay return shipping. The original delivery cost will be refunded if your claim is valid.